2027 KAWASAKI MULE SX 4x4- K10119

Styled in the image of its full-size MULE™ PRO siblings, the MULE SX™ family of utility vehicles packs plenty of stout muscle into compact and agile 2-passenger side x sides. Handle a wide variety of tasks with the ability to tread lightly and maneuver in tight areas—and fit in the bed of a full-size pickup truck.

FEATURING:
401cc 4-STROKE ENGINE
CONTINUOUSLY VARIABLE TRANSMISSION (CVT) WITH (H,L,N,R)
COMPACT SIZE AND TIGHT TURNING RADIUS
STEEL CARGO BED WITH TEXTURED FLOOR
1,100-LB TOWING CAPACITY
3-YEAR LIMITED FACTORY WARRANTY

ADDITIONAL VEHICLE FEATURES:
2WD/dual-mode rear differential with diff. lock
10-in wheels with 22-in Duro tires
Halogen headlights

Engine 4-stroke, single-cylinder, OHV, air-cooled
Displacement 401cc
Maximum Horsepower 12.3 hp¹ @ 3,800 rpm
Maximum Torque 20.6 lb-ft @ 2,200 rpm
Bore x Stroke 82.0 x 76.0mm
Compression Ratio 8.3:1
Fuel System Nikki 6C1026 carburetor
Transmission Continuously Variable Transmission (CVT) with (H,L,N,R)
Final Drive 2WD, shaft. Dual mode rear differential with differential lock
Engine Braking No
Alternator Output (max) 17 amp
Front Suspension / Wheel Travel MacPherson Strut/3.1 in
Rear Suspension / Wheel Travel Unit Swingarm/3.1 in
Front Tires 22 x 9-10
Rear Tires 22 x 11-10
Steering Rack-and-pinion
Front Brakes Drum
Rear Brakes Drum
Park Brake Type Independent, mechanical drum
Ground Clearance 6.1 in
Fuel Capacity 4.2 gal
Turning Radius 10.8 ft
Cargo Bed Dimensions (LxWxH) 35.6 x 40.9 x 9.6 in
Cargo Bed Load Capacity 399 lb
Payload Capacity 926 lb
Seating Capacity 2
Towing Capacity 1,100 lb***
Lighting (2) Halogen headlights, tail/brake lights
Overall Length 106.7 in
Overall Width 52.6 in
Overall Height 70.1 in
Estimated Dry Weight 927.9 lb**
Curb Weight 967.6 lb*
Wheelbase 70.1 in
Instruments Fuel gauge, hour meter, oil temp light, parking brake light

All units are plus tax, freight/setup.

Additional KPP Warranty Programs available

Destination

Covers the cost to transport the unit from the manufacturer to the dealership
Includes crating, shipping, fuel surcharges, and logistics handling

Assembly / PDI

Uncrating the unit
Professional assembly (specialty tools required)
Fluids, battery install, torque checks
Safety inspection and test run
This ensures your bike/ATV/SxS is safe, inspected, and warrantied correctly
Manufacturers require proper setup for the warranty to be valid