Trailer Showroom
2026 Utility Trailer 4000D-X Composite
Get in Touch
Description
2026 Utility Trailer 4000D-X Composite
The thin-wall 4000D-X Composite dry van features polyurethane foam core composite side walls that optimize strength and deliver a lower tare weight.
Features may include:
- Injected polyurethane foam core composite side wall
- Snag-Free® interior lining
- 80K flush steel logistics posts
- Optimized cubic load space
- Stainless steel rear door frame
- 27" deep integrated threshold plate assembly
- 20,000 lb floor rating
- Strong light weight aluminum exterior side skin with Ultra Road Shield™ Plus (URS+)
- Support leg bracing
- 12" galvanized steel wearband
- Diagonal reinforcing gussets on slider rails
- ConMet Preset Plus® premium wheel end system
- Unique tensioned roof design
- 6-post front wall
- Corrosion protection
- USS-120A-4 Aerodynamic Side Skirt
- Heavy-duty kingpin section
- 110½" rear door opening height
- Bendix® TABS-6™ ABS system
- D.O.T. rated I.C.C. bumper
- Composite plate rear doors
- Ultra Road Shield™ Plus (URS+)
- 100% soldered main harness
- Hendrickson® ULTRAA-K™ 40K air ride suspension & slider system
Info
Industry
Trailer
Make
Utility Trailer
Model
4000D-X Composite
Trim
Base
Year
2026
MSRP
N/A
Category
Dry Van Trailer
Subcategory
Dry Van Trailer
Specs
GVWR
65,000 lbs
Max Load
Payload: 55,000 lbs
Height
Overall: 13 ft 6 in on 46 1/2 in height 5th wheel | Inside: 110 1/2 in at front and 111 in at rear
Width
Overall: 102 3/8 in | Inside: 101 in at wearband
Length
Overall: 53 ft 0 in
Notes
Deck: Straight with 1/2 in wedge | Roof bows: 11/16 in anti-snag 18 ga. galvanized steel bows bonded to roof skin
Frame
Front Subframe: 3 1/2 in deep box beam design; raised 1 3/8 in
Top Rail
4 1/2 in deep heavy-duty extruded aluminum | Front: Extruded aluminum wraparound | Bottom: 10 5/8 in deep heavy-duty extruded aluminum
Crossmembers
Front: 23/16 in steel hat-shaped crossmembers with continuous endplate | Rear: 4 in steel 80,000 psi I-beam crossmembers with 4 rivet end clips on 12 in center line
Suspension
Slider Suspension: 70 in rear and 166 in forward for 96 in of slider travel
Walls
Front wall posts: (4) 2 in 14 ga. high strength 50 steel hat-shaped posts
Gate/Door
Rear door hinge material: Non-polished aluminum | Rear door hinges: 4 per door | Rear door lock rods: 1 per door | Rear door panels: 1/2 in composite rear swing doors with pre-painted white galvanized steel panels with polyethylene core
Floor
Type: 1 3/8 in laminated hardwood floor with 20,000 lbs front axle fork truck rating and with 3 screws per board per crossmember
Electrical
Electrical receptacle: 7-way without circuit breakers | Main harness: Utility moisture-resistant 6-wire harness with internal ground and 7-way plug
Lights
Clearance lights quantity: 0-1-2-5 D.O.T. minimum clearance light package | Rear header clearance lights: Grote® Micronova® LED grommet-mounted | Upper clearance lights: Factory choice LED with 3" mounting hole at center line | Lower clearance lights: Grote® Micronova® LED PC-rated | Side mounted directional light: Grote® Supernova® LED combo on bracket below bottom rail (each side) | ABS warning light: Grote® Micronova® LED PC-rated | Stop, tail, turn lights: Grote® 4 in LED (10-diode) lights, 2 per side with black snap-in flange
Finish
Front panel finish: Pre-painted white with Ultra Road Shield™ Plus (URS+) | Front corner post finish: Natural aluminum | Side panel finish: Pre-painted white with Ultra Road Shield™ Plus (URS+)
Wheels
22.5 in × 8.25 in standard width wheels Factory choice steel 10 hub piloted wheels
Tires
295/75R 22.5 in Michelin X®-Line Energy-T2 14ply Load Range 'G'
